3d Design And Printing Singapore
Top 3D Printing Services in Singapore
- November 10, 2020
- mediaone
What is 3D Printing?
Initially invented in the 1980s by Chuck Hull, an engineer and physicist, 3D printing technology has progressed rapidly.
Alternatively named additive manufacturing, 3D printing is producing an object by depositing material, one tiny layer at a time.
The fundamental concept underlying additive manufacturing may be discovered in rock formations deep underground (dripping water deposits thin layers of minerals to form stalactites and stalagmites), but a more contemporary instance is the common desktop printer.
As an inkjet printer releases individual dots of ink to form images, a 3D printer only releases material where it is needed based on a digital file.
In contrast, most conventional manufacturing processes — which have recently been termed "subtractive manufacturing" — require eliminating excess materials to sift out the desired material.
The consequence: Subtractive manufacturing can waste up to 30 pounds of material for every 1 pound of useful material in some parts, according to a finding from US Energy Department's Oak Ridge National Lab.
With some 3D printing processes, about 98 percent of the raw material is used in the finished part.
This does not even highlight the fact that 3D printing enables manufacturers to produce new shapes and lighter parts that utilize less raw material and require fewer manufacturing steps.
Subsequently, that can translate into lower energy use for 3D printing – up to 50 percent less energy for certain processes compared to conventional manufacturing processes.
Though the possibilities for additive manufacturing are unlimited, presently 3D printing is largely used to construct small, relatively costly components using plastics and metal powders.
3D Printing Service | Additive 3D Asia |
| Specialty | Since 2014, Additive3D Asia has been a renowned leader in Additive Manufacturing based in Singapore serving the Asia Pacific region. They offer state-of-art online 3D printing services, from on-demand production of product prototypes to short-run manufacturing of end-use parts. Additive3D Asia offers a wide range of industrial 3D printing materials. Services: Fused Deposition Modelling, SLA 3D Printing, Polyjet 3D Printing, SLS 3D Printing, MJF 3D Printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://additive3dasia.com/ |
| Address | Block 7 Kallang Place #02-05 Singapore, Singapore 339153 |
| Telephone | +65- 6635 2265 |
| Operating Hours | 10 am to 6 pm |
3D Printing Service | UAM 3D Printing Solutions |
| Specialty | They deliver parts within 24 hours. They supply small production without incurring mold cost. They have different types of industry grade 3D printers for your needs. They provide small volume product parts. You can change design at any time. They calibrate/maintain their printers constantly and print is of high consistency. Services: Direct Metal Laser Sintering, Selective Laser Sintering, Multi Jet Fusion, Fused Deposition Modelling, PolyJet |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.uam3d.com/ |
| Address | 10 Tampines North Drive 4 #03-07 Singapore 528553 JTC Space @ Tampines North |
| Telephone | +65-8125 7838 |
| Operating Hours | 24/7 |
3D Printing Service | 3D Print Singapore |
| Specialty | 3DPS LLP provides 3D printing and custom manufacturing to their clients in aerospace, consumer goods, product design, education, and research industry. They are committed to bring your ideas to life using the best industrial 3D design and manufacturing technologies. They turn ideas into 3D designs, creating 3D models for pre-production. Services: 3D Scanning & Design, PCB Design, Laser Cutting & CNC, Software development, Prototyping |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.3dprintsingapore.com/ |
| Address | 970 Toa Payoh N, #01-18, Singapore 318992 |
| Telephone | +65-8030 3500 |
| Operating Hours | 9 am to 7 pm |
3D Printing Service | Zelta 3D |
| Specialty | Zelta 3D offers professional 3D Printing in Singapore. Utilizing advanced Industrial 3D Printing technology, they can produce high quality parts in multi materials and finishes with lead time as short as 1 business day. They can turn complex ideas into physical items within days, delivering fast upon receiving online orders. Services: SLA printing, MJF printing, SLS printing, FDM 3D Printing, Industrial 3D printing |
| Pricing | Request a quotation: [email protected] |
| Website | www.zelta3d.com |
| Address | 18 Boon Lay Way, 09-151/155 Singapore 609966 |
| Telephone | +65 6259 3309 |
| Operating Hours | 9 am to 8 pm |
3D Printing Service | Creatz3D |
| Specialty | With 18 years of 3D printing expertise, Creatz3D is a pioneer in the industry of 3D printing solution providers. 3D printing allows companies of all industries to turn their ideas into successful end products quickly, efficiently. 3D printing allows risk-taking, customized solutions, reduced lead time, time to market, waste reduction. Services: Fused Deposition Modelling, PolyJet, MakerBot, Stereolithography, Digital Wax Systems |
| Pricing | Request a quotation: [email protected] |
| Website | http://creatz3d.com.sg |
| Address | 180 Paya Lebar Road, Yi Guang Factory Building, #08-07, S409032 |
| Telephone | +65-6631 8555 |
| Operating Hours | 9 am to 6pm |
3D Printing Service | 3D Matters |
| Specialty | Headquartered in Singapore, 3D Matters is one of the longest established Additive Manufacturers in SEA with a strong track record of helping clients grow their 3D printing needs. 3D Matters grew as an end-to-end, integrated 3D Printing Service Bureau to support clients through all stages of their 3D printing journey. Services: Scanning & Design Capture, CAD & Design Optimisation, Consultancy & Diagnostics, 3D Printing & Finishing, Material Advisory |
| Pricing | Request a quotation: [email protected] |
| Website | http://3dmatters.com.sg/ |
| Address | Science Park HQ, 10 Science Park Road, The Alpha, #01-06, Singapore Science Park II Singapore 117684 |
| Telephone | +65-3157 9900 |
| Operating Hours | 9.30 am to 6 pm |
3D Printing Service | 3D Bots |
| Specialty | Professional grade 3D printers offer superior, print resolution, quality in comparison with consumer grade printers. These leagues of printers have larger print capacities, superior resolution, use multiple materials. While choosing the right professional grade 3D printer, consider the size of your prints and the technology that is right for you. Services: da Vinci 3D Printer, Nobel 3D Printer, Mark Two 3D printer, Onyx 3D printers, Metal 3D Printing |
| Pricing | Request a quotation: [email protected] |
| Website | http://www.3dbots.sg/ |
| Address | 203A Henderson Rd, #02-03 Henderson Industrial Park, Singapore 159546 |
| Telephone | +65-6273 7252 |
| Operating Hours | 9 am to 6.30 pm |
3D Printing Service | Siege |
| Specialty | Siege's vision is to lead in additive manufacturing services, revolutionizing the manufacturing industry. They focus on bringing ideas to reality, at affordable rates, through forward thinking and innovation. Their passion for creation drives their goal of providing diversified manufacturing possibilities, using Original Prusa i3 MK2S 3D printers for precise reproduction. Services: 3D Design Services, Rapid Prototyping, Small Batch Manufacturing, Mass Manufacturing, On-Demand 3D Printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.siegeadvancedmanufacturing.com/ |
| Address | 38 Ang Mo Kio Industrial Park 2 Lobby A, #06-05, 569511 |
| Telephone | +65-9846 0876 |
| Operating Hours | 24/7 |
3D Printing Service | Build it Full |
| Specialty | Their comprehensive printing process involves: Upload your 3D file. Select the material, upload your file(s) and get quoted instantly. They process your order once payment is made. They perform the 3D printing for you. You will receive email notification upon completion. They use Simplify 3D Slicer version: 4.1.2 for scanning. Services: Prototyping, 3D modelling, 3D printing, jewellery printing, figurine printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://builditfull.com/ |
| Address | 16 Shaw Road, #03-08 Kin Building Singapore, Singapore 367954 |
| Telephone | +65-94873820 |
| Operating Hours | 10 am to 6 pm |
3D Printing Service | Chemtron |
| Specialty | Spurred by Innovation, Chemtron Pte Ltd was established in 1996 to lead the industry by providing valuable technologies and solutions to our clients. They carry a complete portfolio of solutions that is making rapid head way into various industries such as manufacturing, medical, jewellery, aerospace and dental markets, service oriented. Services: CAD modelling, 3D printing, 3D scanning, VIDA 3D printers, Vector 3D printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.chemtron.asia/ |
| Address | Blk 203A Henderson Road, Henderson Industrial Park, #02-03 Singapore, Singapore 159546 |
| Telephone | +65- 6273 7252 |
| Operating Hours | 9 am to 6 pm |
3D Printing Service | DKSH |
| Specialty | DKSH is shaping the development of a new technology – additive manufacturing. By partnering with the top industry leaders, they are bringing the latest technologies and integrated solutions in additive manufacturing to Korea, Philippines, Malaysia, Singapore, Thailand, and Vietnam. They offer integrated solutions to facilitate transition from conventional to additive manufacturing. Services: BigRep 3D printers, HP 3D printers, Formlabs 3D printers, Ultimaker 3D printers, online 3D printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.dksh.com/global-en/home |
| Address | 625 Lorong 4 Toa Payoh #03-00, Singapore 319519 |
| Telephone | +65-6274 1222 |
| Operating Hours | 8 am to 5.30 pm |
3D Printing Service | SP3D |
| Specialty | Their team is dedicated to build prototypes from your designs, 3D models or even simple drafts. They produce your design and ship them as fast as in 24h. They deliver what you request for. They honour promises, requests. They commit to deliver products in Quality. They systematically control their parts. Services: Rapid prototyping, Reverse engineering, injection molding, industrial sourcing, design, and engineering |
| Pricing | Request a quotation: [email protected] |
| Website | https://prototype-in-asia.com/ |
| Address | 91C Lavender Street Singapore 338719 |
| Telephone | +65-69090460 |
| Operating Hours | 24/7 |
3D Printing Service | ECSS |
| Specialty | Engineering Computer Services (S) Pte Ltd (ECS) was one of the pioneers in the CAD/CAM/CAE industries in Singapore. Having introduced the 2D CAD system, ECS transformed over the years to support a full range of CAD/CAM/CAE solutions like 3D CAD systems, Computer Aided Machining, Finite Element Analysis, Product Data Management. Services: Product design, 3D scanning, 3D printing, CAD modelling, reverse engineering |
| Pricing | Request a quotation: [email protected] |
| Website | https://ecss.sg/ |
| Address | Blk 19 #03-161/163, Kallang Avenue, Singapore 339410 |
| Telephone | +65-6295 3566 |
| Operating Hours | 8.30 am to 6 pm |
3D Printing Service | 3D Aura |
| Specialty | 3D Aura's concept store, eCommerce shopping sites and support centre are all designed to provide the best possible experience while shopping for your next 3D Printer. They keep an extensive inventory of printers and consumables in stock to ship out same day, have their own technical support team for service. Service: CAD modelling, FlashForge 3D printer, Sindoh 3D printer, Intamsys Funmat 3D printer, 3D printer maintenance |
| Pricing | Request a quotation: [email protected] |
| Website | https://3daura.com.sg/ |
| Address | 7030 Ang Mo Kio Avenue 5 #07-25 [email protected] S569880 |
| Telephone | +65 8290 4413 / +65 6904 4393 |
| Operating Hours | 9 am to 6 pm |
3D Printing Service | iCreate3D |
| Specialty | Customers provide concepts; they realize concepts. They bring clients' ideas into life using 3D printing technologies. The moment customers nod with great satisfaction with a grin on their faces when they see their ideas become a reality on their hands, they are fulfilled. Your Ideas, I Create is their motto. Services: Design, 3D printing, touch up, enhancement, mass printing |
| Pricing | Request a quotation: [email protected] |
| Website | https://icreate3dprint.com/ |
| Address | 38 Ang Mo Kio Industrial Park 2 #03-34 Singapore 569511 |
| Telephone | +65-9030 5133 |
| Operating Hours | 9 am to 10 pm |
3D Printing Service | Print-IQ |
| Specialty | Print-IQ is the Premier Partner for HP copiers & printers and the leading channel partner for copiers/printers in Singapore. In addition, Print-IQ's diverse offerings include partnering with Ultimaker, a top leading brand in 3D printers, document services & software solutions from top brands, distributing, maintaining 3D printers, managing print services. Services: HP 3D printers, Ultimaker 3D printers, managed print services, software solutions, office solutions |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.print-iq.com.sg/ |
| Address | 11 Changi North Way Serial I-Tech Building Singapore 498796 |
| Telephone | +65- 6100 7746 |
| Operating Hours | 9 am to 5.45 pm |
3D Printing Service | 3D Metal Forge |
| Specialty | They are a leading global AM company that supports cutting-edge companies with their global metal printing requirements. Their high tech facility and engineering teams are based in Singapore and the USA. They have impressive ranges of printing equipment, including LAAM printers that can produce high quality metal parts, with speed, precision. Services: Additive manufacturing, production, material advisory, design, post-production |
| Pricing | Request a quotation: [email protected] |
| Website | https://namic.sg/ |
| Address | 10 Science Park Road, #01-06, The Alpha, Singapore Science Park II, Singapore 117684 |
| Telephone | +65 3157 9900 |
| Operating Hours | 9 am to 6 pmReview 2 |
3D Printing Service | ECOmaylene 3D |
| Specialty | ECOmaylene ® 3D Printing Filament is the flagship product of Winrigo Pte Ltd. With knowledge and experience as a plastic compounding manufacturer, they are dedicated to continuous research, innovation and product development. Winrigo is the leading manufacturer of 3D printing filaments in Singapore, committed to material technologies of 3D printing. Hyper + 3 3D printer, 3D printing services, prototyping, design projects, custom gifts |
| Pricing | Request a quotation: [email protected] |
| Website | http://www.ecomaylene3d.com/ |
| Address | 18 Boon Lay Way, Tradehub21, #05-102, Singapore 609966 |
| Telephone | +65- 6515 9989 |
| Operating Hours | 9 am to 6 pm |
3D Printing Service | Kingly |
| Specialty | Kingly was founded on passion for technology and efficiency. With background in implementing large scale IT projects and Change Management for governments and corporations, they understand the importance of communication and building a seamless customer experience. They work with independent retailers, small businesses, and corporations passionate about their products, branding. Services: 3D printer filaments, 3D printer parts, 3D printers, toner and drum, biometric systems |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.kingly.sg/ |
| Address | 1 Bukit Batok Crescent Singapore 658064 |
| Telephone | +65-6871 4180 |
| Operating Hours | 9 am to 5 pm |
3D Printing Service | 3D Generation |
| Specialty | 3D Generation Pte Ltd is specialises in commercial grade large format 3D printing. They provide turnkey projects, solutions related to 3D printing. From Conceptualisation to 3D Consultation, 3D Modelling, 3D Printing, Prototyping and Post-production, they provide 3D printing solutions. They provide 3D printing for those seeking to actualize concepts physically. Services: 3D Consultation, 3D Modelling, 3D Printing, Prototyping, Post-production |
| Pricing | Request a quotation: [email protected] |
| Website | https://www.3dgeneration.sg/ |
| Address | 87 Defu Lane 10, #03-10, Singapore 539219 |
| Telephone | +65 64932688 |
| Operating Hours | 10 am to 6 pm |
3D Printing Service | Maha Chemicals(Asia) Pte Ltd |
| Specialty | Services:
|
| Website | https://www.mahachem.com |
| Address | 51 Tuas West Drive Singapore 638415 |
| Contact | Telephone : (65) 6863 1808 Email: [email protected] |
How Does a 3D Printer work?
Additive manufacturing technology is manifested in multiple shapes and sizes, but no matter the type of 3D printer or material you are using, the 3D printing process follows the same basic steps.
It begins with creating a 3D blueprint using computer-aided design (commonly called CAD) software.
Creators are only limited by their imaginations.
For instance, 3D printers have been used to manufacture everything from robots and prosthetic limbs to custom shoes and musical instruments.
Currently funding is secured from government for a new low-cost 3D metal printer.
Once the 3D blueprint is created, the printer needs initial preparation.
This includes refilling the raw materials (such as plastics, metal powders or binding solutions) and preparing the build platform.
Once you hit print, the machine takes over, automatically building the desired object.
Material extrusion functions like a glue gun.
The printing material — typically a plastic filament — is heated until it liquefies and extruded through the print nozzle. Using information from the digital file — the design is split into thin two-dimensional cross-sections, hence the printer knows exactly where to put material — the nozzle deposits the polymer in thin layers, often 0.1 millimeter thick.
The polymer solidifies quickly, bonding to the layer below before the build platform lowers and the print head adds another layer.
Types of 3D printers
Over the years, the 3D printing industry has grown dramatically, creating new technologies.
Different types of 3D Printing
Material Jetting: Resembling a standard desktop printer, material jetting deposits material through an inkjet printer head.
The process typically uses a plastic that requires light to harden it (called a photopolymer) but it can also print waxes and other materials.
While material jetting can produce accurate parts and incorporate multiple materials using additional inkjet printer nozzles, the machines are relatively expensive and build times can be slow.
Binder Jetting: In binder jetting, a thin layer of powder (this can be anything from plastics or glass to metals or sand) is rolled across the build platform.
Then the printer head sprays a binding solution (like a glue) to fuse the powder together only in the places specified in the digital file.
The process repeats until the object is finished printing, and the excess powder that supported the object during the build is removed and saved for later use.
Powder Bed Fusion: Powder bed fusion is similar to binder jetting, except the layers of powder are fused together (either melted or sintered — a process that uses heat or pressure to form a solid mass of material without melting it) using a heat source, such as a laser or electron beam.
Directed Energy Deposition: Directed energy deposition can come in many forms, but they all follow a basic process.
Wire or powder material is deposited into thin layers and melted using a high-energy source, such as a laser. Directed energy deposition systems are commonly used to repair existing parts and build large parts.
Sheet Lamination: Sheet lamination systems bond thin sheets of material (typically paper or metals) together using adhesives, low-temperature heat sources or other forms of energy to produce a 3D object.
Sheet lamination systems allow manufacturers to print with materials that are sensitive to heat, such as paper and electronics, and they offer the lowest material prices of any additive process.
Vat Photopolymerization: Photopolymerization — the oldest type of 3D printer — uses a liquid resin that is cured using special lights to create a 3D object. Depending on the type of printer, it either uses a laser or a projector to trigger a chemical reaction and harden thin layers of the resin.
Benefits of 3D Printing in Singapore
3D printing has the potential to revolutionize manufacturing, allowing companies (and individuals) to create products in new ways while reducing material waste and saving energy.
Why use 3D Printing in Singapore?
If you are ever in need of items that simply cannot be bought around your area, you may want to consider seeking services from the companies with the best 3D printing in Singapore.
If there is a 3D printer, even unusual items or components will not be impossible to obtain.
Sample costs of 3D Printing in Singapore
The price of 3D printers is affordable: beginning from $100.
For about $200 to $300, you can get a good 3D printer which was unheard of before.
For under $300, you can get the Creality3D Ender Precision 3D Printer and start 3D printing magic production.
Editor's Note:
While every precaution has been made to ensure the accuracy and fairness of this listing, we acknowledge that they may be inaccuracies. Therefore, we urge you to contact the service provider above for the correct information and/or contact us with the correct information.
If you are a service provider and wish to be featured in this listing (MediaOne reviews are read by hundreds of thousands of Singaporeans), please contact us at [email protected]. There is no charge! Please allow us up to 3 working days to review before adjusting the information or including your entry.
3d Design And Printing Singapore
Source: https://mediaonemarketing.com.sg/top-3d-printing-services-singapore/
Posted by: cookboun1947.blogspot.com
0 Response to "3d Design And Printing Singapore"
Post a Comment